Lighting Installation Guide
Last Updated: August 24, 2026
AELVENA Lighting Installation Guide
AELVENA is committed to providing customers with safe, reliable, and professional lighting products.
This Installation Guide provides general installation recommendations for AELVENA lighting fixtures, including chandeliers, pendant lights, ceiling lights, wall lamps, floor lamps, and decorative lighting products.
Because lighting installation involves electrical connections and structural mounting, AELVENA strongly recommends that all hardwired lighting products are installed by a qualified electrician or professional installer.
Please carefully read the product specifications, installation instructions, and safety information before installation.
1. Important Safety Information
Electrical Safety
Before installation:
- Turn off the electrical power supply at the circuit breaker.
- Confirm that no electrical current is present.
- Ensure the electrical system matches the fixture voltage requirements.
- Follow all applicable local electrical regulations.
Never install or modify a lighting fixture while connected to electricity.
Professional Installation Recommendation
Professional installation is recommended for:
- Chandeliers
- Large pendant lights
- Ceiling-mounted fixtures
- Hardwired wall lamps
- Heavy decorative lighting fixtures
- Multi-tier lighting installations
Incorrect installation may result in:
- Electrical hazards
- Product damage
- Fixture instability
- Personal injury risks
2. Before Installation
Before beginning installation, please check the following:
Package Inspection
After receiving your AELVENA product:
- Carefully open the package.
- Check all components and accessories.
- Inspect the fixture for transportation damage.
- Confirm that the product specifications match your order.
If any component is damaged or missing, please contact AELVENA Customer Support before installation.
Do not install damaged products.
3. Installation Preparation
Recommended Tools
Prepare the following tools before installation:
- Screwdriver
- Drill
- Measuring tape
- Level
- Wire connectors
- Ladder
- Protective gloves
Installation Checklist
Before mounting the fixture:
✓ Confirm the installation location is suitable
✓ Check ceiling or wall load capacity
✓ Verify electrical compatibility
✓ Measure installation height
✓ Prepare all mounting accessories
4. General Installation Process
Most AELVENA hardwired lighting products follow these general steps.
Step 1 — Turn Off Electrical Power
Switch off power at the circuit breaker.
Ensure the power supply is completely disconnected before installation.
Step 2 — Install Mounting Bracket
Secure the mounting bracket or ceiling plate to the electrical junction box.
Make sure:
- Screws are properly tightened.
- The mounting structure is stable.
- The fixture weight is fully supported.
For large chandeliers, additional ceiling reinforcement may be required.
Step 3 — Connect Electrical Wiring
Connect wires according to local electrical standards.
Typical wiring:
- Live Wire (L)
- Neutral Wire (N)
- Ground/Earth Wire (if applicable)
Incorrect wiring may damage the fixture or create safety risks.
If unsure, consult a licensed electrician.
Step 4 — Install the Fixture Body
Carefully attach:
- Lamp body
- Suspension rods
- Hanging cables
- Decorative elements
- Lampshades
Avoid excessive force during installation.
Step 5 — Install Light Source
Depending on the product:
- Install compatible bulbs.
- Confirm bulb type.
- Confirm maximum wattage.
- Check dimming compatibility.
Only use recommended bulbs and electrical components.
Step 6 — Final Inspection
Before switching on power:
Check:
- All screws are tightened.
- Fixture is stable.
- Decorative components are correctly installed.
- Wiring connections are secure.
Restore power and test the lighting function.
5. Chandelier Installation Guide
Chandeliers are designed as decorative focal points and require careful positioning.
Dining Room Chandelier Height
For chandeliers above dining tables:
Recommended distance:
30–36 inches (75–90 cm)
from the bottom of the chandelier to the tabletop.
This provides:
- Comfortable visual balance
- Proper lighting coverage
- Sufficient head clearance
Living Room Chandelier Height
Recommended minimum clearance:
7 feet (210 cm)
from the floor to the lowest point of the fixture.
For high ceilings:
- Consider room proportions.
- Adjust hanging height according to space design.
6. Pendant Light Installation Guide
Pendant lights are commonly installed above:
- Dining tables
- Kitchen islands
- Bars
- Bedside areas
- Entry spaces
Recommended hanging height:
Dining Table
Approximately:
30–36 inches (75–90 cm)
above the tabletop.
Kitchen Island
Recommended:
30–40 inches (75–100 cm)
above the countertop.
7. Wall Lamp Installation Guide
Before installing wall lamps:
Check:
- Wall structure strength
- Electrical outlet position
- Installation height
Recommended height:
Approximately:
55–65 inches (140–165 cm)
from the floor to the center of the wall lamp.
Adjust according to:
- Room design
- Furniture height
- Lighting purpose
8. Ceiling Light Installation Guide
For ceiling-mounted fixtures:
Before installation:
- Confirm ceiling structure.
- Check junction box compatibility.
- Ensure sufficient support.
For large ceiling lights:
Additional reinforcement may be required.
9. Floor Lamp Installation Guide
For floor lamps:
- Place on stable and level surfaces.
- Keep away from excessive moisture.
- Avoid blocking walking areas.
- Ensure cable placement is safe.
10. Installation Notes for Premium Materials
AELVENA lighting products may include:
- Glass
- Crystal
- Ceramic
- Marble
- Alabaster
- Travertine
- Brass
- Natural stone
Natural materials have unique characteristics.
Variations in:
- Color
- Texture
- Veining
- Surface patterns
are natural features and should not be considered defects.
11. Glass & Crystal Installation Care
When installing glass or crystal components:
- Wear protective gloves.
- Hold components carefully.
- Avoid impact or pressure.
- Do not overtighten screws.
Handcrafted glass and crystal may have slight variations.
12. Marble, Alabaster & Natural Stone Care
Natural stone products:
- Are individually unique.
- May have different patterns and colors.
- Require careful handling.
During installation:
Avoid:
- Strong impact
- Dropping components
- Chemical cleaners
Clean with:
- Soft dry cloth
- Gentle cleaning materials
13. Troubleshooting
Light Does Not Turn On
Check:
- Power supply.
- Switch operation.
- Bulb installation.
- Wiring connection.
Light Flickering
Possible causes:
- Incorrect bulb type.
- Dimmer compatibility issue.
- Loose electrical connection.
Fixture Is Not Level
Check:
- Mounting bracket.
- Suspension adjustment.
- Ceiling position.
14. Maintenance After Installation
To maintain your AELVENA lighting fixture:
Cleaning
Recommended:
- Soft microfiber cloth
- Dry cleaning method
Avoid:
- Abrasive materials
- Strong chemicals
- Excessive water
Regular Inspection
Periodically check:
- Mounting stability
- Screws
- Electrical connections
- Decorative components
15. Important Installation Notice
AELVENA is not responsible for damage caused by:
- Incorrect installation
- Improper electrical connection
- Unauthorized modification
- Failure to follow installation instructions
- Installation by unqualified personnel
Professional installation is recommended for all hardwired lighting products.
16. Installation Support
If you need assistance regarding:
- Installation instructions
- Replacement parts
- Technical questions
- Product specifications
Please contact:
AELVENA Customer Support
Email:
We are committed to providing professional support for your lighting experience.
AELVENA
Modern Lighting · Timeless Design · Crafted for Your Space